Easy To Make DIY Wood Window Valance: How To Tutorial

simplydiyhome.com

If you’re looking to add a touch of charm and character to your home’s interior then, DIY Wood Window Valances might just be the project for you.

Materials List

– Tape Measure – Level – Palm Sander – Nail Gun – Paint Can Opener – Miter Saw

Step One: Measure & Cut Wood First thing, you are going to do is measure your window. The 1×2’s are going to be your brace pieces of wood that you secure your 1×6 too, so make sure you measure 1.5″ on either side of the window.

How To Build A DIY Wood Window Valances

Once you have your measurements you can cut your boards down to size. I chose to go with pine boards for this project. Constructing the wood window valances is a straightforward process, it only requires 3 boards.

Begin by taking a 1×6 board and measure it to match the width of your window, then add an extra 3 inches for the 1×2 braces. Once you have that measurement you can cut your board.

The next step is to create two 1×2 braces, one for each side of your 1×6 board. It’s important to note that a 1×6 board is actually 5.5 inches wide rather than a full 6 inches. To achieve a snug fit, I opted to cut my 1×2 braces to a length of 5 inches.

Before staining your wood you need to make sure to give it a good sand with at least 220 grit sandpaper.

Step Two: Stain Wood Pieces

From my perspective, staining the wood pieces before assembly significantly simplifies this project. I relied on my well-practiced staining technique that perfectly complements our floors, creating a seamless look.

Swipe up to learn more!

simplydiyhome.com

MORE POSTS

Easy DIY Farmhouse Style Window Trim: How To Install

How To DIY a Easy Wood Floating Picture Shelf